Over time, the Blocked Drains Melbourne in your kitchen and bathroom begin to clog. This is a common problem that many households face. The best way to prevent it is by keeping track of your drains every now and then. If you notice any buildup of soap scum or dirt particles on the surface, get rid of them immediately so as not have any blockages occur in the future.

In this article we will address how you can prevent unblock drain blockage through 5 DIY methods.

Boiling water

To unblock a drain, fill a bucket with boiling water and pour it down the drain. Repeat until the water coming out is clear. Drain the water and flush the toilet to remove any remaining debris. This method works best if you don't have many items in your sink or bathtub that could have caused buildup in the pipes.

Natural cleaners

  • Lemon juice and vinegar are natural cleaners. They can be used to clean and unblock your drain. Just pour hot water down the sink, add about 5 tablespoons of white vinegar, then let it sit for half an hour before pouring boiling water down the drain to rinse away any remaining residue.
  • Bicarbonate of soda mixed with vinegar works in much the same way as lemon juice and vinegar but is slightly more effective because bicarbonate is alkaline — not acidic like lemon — which makes it more effective at breaking down grease and grime buildup in your pipes.
  • Baking soda mixed with boiling water or hot tap water will also work well as a natural cleaner for blocked drains due to its high alkalinity (pH 12–14).

Baking Soda

Another way to unblock a drain is by using baking soda. The alkalinity of baking soda helps remove grease, soap scum and other blockages from pipes.

To use:

  • Mix 2 tablespoons of baking soda with vinegar in a bowl, then pour into the clogged drain and let sit for at least 10 minutes before rinsing with boiling water. You should also use this method if you have an odor coming from your sink or tub drains because it can also neutralize unpleasant odors from food particles left behind after cooking.

Coat Hanger

The coat hanger method is a quick way to unblock a drain. To use this method, push the end of your coat hanger through the drain and then twist it until you feel resistance. If you are unable to twist the end of your plastic hanger into your sink or shower p-trap, use a metal one instead!

Check the U-Pipe

The second method is to check the U-Pipe. This is a pipe that goes across the floor of your shower, which connects to the drain pipe located behind your bath tub or toilet. If you have one in your bathroom, it’s easy enough to remove and inspect it for any signs of blockage or leaking.

To do this, follow these steps:

  • Turn off all water taps in your home so there is no chance of flooding as you work on unblocking drain blockages
  • Remove any trimming from around the U-Pipe and use a screwdriver or wrench to disconnect it from its connecting point with a screwdriver or wrench (depending on how tight it is). You can then fully remove it by pulling upwards on its end opposite where it was connected at; be careful not to rip out any pipes connected below!

So, if you’re looking for a way to unclog your pipes, these DIY methods are all excellent options. There’s no need to call the plumber Blocked Drains Melbourne or spend hundreds on professional services when there are so many affordable and effective solutions available right in your home!


Source: https://nlkplumbersmelbourne.blogspot.com/2022/07/5-diy-methods-to-prevent-unblock-drain.html